Shower Plug 5L | Seals 150m²
Total price:
$297.00 (+10% GST for Australian Customers)Ideal for tradesmen tasked with waterproofing up to 150m² of masonry. Shower Plug fixes and prevents leaks in showers, balconies and all masonry surfaces by penetrating into the masonry surface and forming a water-repellent barrier. Lasts 10 years.
Coverage: 125-150m2.
Shower Plug is advanced waterproofing technology made simple to use.
Advantages of Shower Plug
Released in 1992, Shower Plug is the original and still the premium penetrating sealer technology for leaking shower repair in Australia. Shower Plug provides cost and time efficiency, longevity and reliability through this technology.
Fixing 150m² of leaking balcony or showers, methods compared:
| Tile and membrane removal and replacement | Shower Plug 5L | |
|---|---|---|
| Cost ($) | > $1000 | $297 |
| Cost (time) | > 5 days | 1hr/L application, ready to use in 12 hours |
| Skill level required | Trade | DIY |
| Effective lifespan | 5 years on average | 10 years minimum (warranty) |
- Shower Plug prevents mould
- Shower Plug makes surfaces easier to clean and reduces the amount of detergents needed
- It does not change surface appearance or make the surface slippery
- Effective indoors and outdoors. Shower Plug is friction, weather and UV-resistant
- Shower Plug will seal gaps of up to 1mm width. For larger cracks, patch up with grout or silicone
- Surface will remain breathable, allowing trapped water to escape from below the tiles and dry out
- For use on new and existing showers and balconies
- Safer than household paint.
Australian designed, made and owned for maximum reliability in shower waterproofing.
How-To: Bathroom Waterproofing
Shower Plug's advanced chemistry not only provides long-term results, but it also does the hard work for you.
Using a natural bristle brush, apply two coats of Shower Plug, five minutes apart, and then wipe away the remaining excess five minutes after the second coat.
Job done, without removing tiles.
Application Notes for Shower Plug
Shower Plug’s formulation is high quality and therefore very safe to use. Nevertheless, it is always advisable to use protective gear and ventilation when applying the product.
Shower Plug does not change the surface texture or appearance. Remember to wipe the final coat off within five minutes. If Shower Plug is left to dry out on the surface, a white residue will remain. Remove this with turpentine.
Shower Plug will give off a solvent-type odour as it is is applied and as it cures. This odour will fade by the end of the curing process.
Shower Plug does not affect clothing.
Shower Plug is suitable for use on:
Grout
Tiles, including: ceramic, porcelain, marble, glazed or unglazed, terrazzo, slate, terracotta, and others.
Concrete
Terracotta
Stone
Bare plaster (in order to later paint over plaster treated with Shower Plug, a solvent primer undercoat is required).
Unsuitable surfaces include:
Plastics/polymers; polyurethane, polycarbonate, etc.
Glass
Metal
Wood
Painted surfaces.