Shower Plug 5L | Shower waterproofing that lasts 10 years
February 1, 2016
Shower Plug 220mL | Shower waterproofing that lasts 10 years
March 11, 2016
Show all

Shower Plug 1L | Shower waterproofing that lasts 10 years

$99.95

Waterproof four showers with 30 minutes of DIY work each, using just a brush, a cloth and a 1L can of Shower Plug. Shower Plug fixes and prevents leaks in showers, balconies and all masonry surfaces by penetrating into the masonry surface and forming a water-repellent barrier. Lasts 10 years.

Coverage: 25-30m​²​.

Shower Plug gives ​you the solution.

In stock

SKU: SP1L Category:
Description

Advantages of Shower Plug

Released in 1992, Shower Plug is the original and still the premium penetrating sealer technology for leaking shower repair in Australia. Shower Plug provides cost and time efficiency, longevity and reliability through this technology.

Fixing 30m² of leaking balcony or showers, methods compared:

Tile and membrane removal and replacementShower Plug 1L
Cost ($)> $5000$99.95
Cost (time)> 5 days1 hour application, ready to use in 12 hours
Skill level requiredTradeDIY
Effective lifespan5 years on average10 years minimum (warranty)
  • Shower Plug prevents mould
  • Shower Plug makes surfaces easier to clean and reduces the amount of detergents needed
  • It does not change surface appearance or make the surface slippery
  • Effective indoors and outdoors. Shower Plug is friction, weather and UV-resistant
  • Shower Plug will seal gaps of up to 1mm width. For larger cracks, patch up with grout or silicone
  • Surface will remain breathable, allowing trapped water to escape from below the tiles and dry out
  • For use on new and existing showers and balconies
  • Safer than household paint.

Australian designed, made and owned for maximum reliability in shower waterproofing.

How-To: Bathroom Waterproofing

Shower Plug’s advanced chemistry not only provides long-term results, but it also does the hard work for you.

Using a natural bristle brush or for large surfaces a spray or roller, apply two coats of Shower Plug, five minutes apart, and then wipe away the remaining excess five minutes after the second coat.

Job done, without removing tiles.

Application Notes for Shower Plug

Shower Plug’s formulation is high quality and therefore very safe to use. Nevertheless, it is always advisable to use protective gear and ventilation when applying the product.

Shower Plug does not change the surface texture or appearance. Remember to wipe the final coat off within five minutes. If Shower Plug is left to dry out on the surface, a white residue will remain. Remove this with turpentine.

Shower Plug will give off a solvent-type odour as it is is applied and as it cures. This odour will fade by the end of the curing process.

Shower Plug does not affect clothing.

Shower Plug is suitable for use on:

  • Grout
  • Tiles, including: ceramic, porcelain, marble, glazed or unglazed, terrazzo, slate, terracotta, and others.
  • Concrete
  • Terracotta
  • Stone
  • Bare plaster (in order to later paint over plaster treated with Shower Plug, a solvent primer undercoat is required).

Unsuitable surfaces include:

  • Plastics/polymers; polyurethane, polycarbonate, etc.
  • Glass
  • Metal
  • Wood
  • Painted surfaces.

Shower Plug binds to all masonry and only masonry.

Purchase Shower Plug 1L now to begin your waterproofing project.

In stock

Also available at Bunnings Warehouse (within Australia).
Orders shipped outside Australia will not attract the GST (Goods and Services Tax, 10%).

Additional information
Weight1 kg
Dimensions11 x 11 x 15 cm