|
Fix Leaking Showers: Instructions
This guide will show you how to use Shower Plug to fix a leaking shower or tiled area, and how you can combine it with Slip Grip to make it safer.
Shower Plug: Directions
Shower Plug is used to fix leaking showers and tiled areas. The clear, brush-on solution that soaks into tiles & grout making them water-repellent.
APPLICATION INSTRUCTIONS
Directions
- Clean algae & mould off tiles and grout using bleach.
- Fix any cracked or broken grout.
- Allow surface to dry for at least 6 hours.
- Protect glass and painted surfaces.
- Brush Shower Plug on tiles beginning at top of wall and covering entire wall and floor.
- Wait 5 minutes.
- Apply 2nd coat, as above. Wait 5 minutes then wipe any residue with a dry cloth.
- Allow surface to dry for 12 –18 hours before use.
- Clean brush and any splashes on glass with mineral turpentine.
- Apply silicone sealant in joint between wall and floor.
Shower Plug - Slip Grip: Combination
Shower Plug will fix a leaking shower (or any tiled area) and Slip Grip will prevent slipping on shower tiles.
APPLICATION INSTRUCTIONS
Directions
- Clean tiles thoroughly and wipe until touch dry.
- Test in an inconspicous area to ensure satisfaction. (Apply 1st coat, wait 5minutes. Apply 2nd coat, wait 5minutes. Apply 3rd coat, wait 5 minutes. Wash off. Check if satisfied with appearance. Slide a damp cloth/paper towel from untreated area to treated area. Surface should ‘grip’ cloth at treated area.)
- Brush or sponge undiluted Slip Grip evenly onto tiles. Apply 1st coat, wait 5 minutes. Apply third coat wait five minutes, then wash off.
Do not allow surface to dry between applications.
- Rinse surface thoroughly with water immediately after final application.
- Area is ready for immediate use.
- Wash equipment in cold water.
- For extra grip repeat application after 48 hours.
|
